Totem Air Storage Tank 50 L - 300 Bar with...
50 liter refill cylinder, so you can connect to your compressor and have good autonomy to fill your paintball tanks.
Measurements: 155x20
Used CO2 Pin and On/Off Valves
50 liter refill cylinder, so you can connect to your compressor and have good autonomy to fill your paintball tanks.
Measurements: 155x20
Bottle valve adapter particularly for pin valves.
The Quick Filler is the fastest way to fill a paintball tank with high pressure air.
For use with Macroline 6.3 mm hose fittings only. Awesome alternative to steel braided hoses that never seem to be long or short enough.
30 cm
1.1 Liter (4500 PSI / 300 bar)
PI certification
Weight 650g
Diameter 100 mm
Height 220 mm
Connect effortlessly to any HP installation point with adaptable configurations. This regulator reduces pressure in you Manta Paintball filling system from 300 bar to 200 bar, ensuring worry-free self-service use at dedicated 200-bar stations, preventing clients from exceeding bottle pressure limits. The cover is a safety feature that prevents adjustments to the pressure reducer by unauthorized personal as it’s secured with screws against removal.
Comes with an on / off valve, to make shutting off the CO2 flow to the gun easy - Just turn the valve off and unscrew the tank, saving you lots of air!
Approximately 1100 shots per fill, never have to worry about running out of air mid-game
Parts to repair Totem Air Preset Regulators.
For use with Tank mounted adjustable regulators. Tanks that screw in will NOT fit with this dropforward without additional parts.
The Steel Braided Hose allows users to connect a fill panel with a compressor or another fill panel. Our hoses have got male connections at each end.
Totem Air Regulator Part S10 - 7.5K Burst Disk
Used on 4500 PSI preset regulators
Your gun isn´t going to shoot itself, is it?
Allows the use of 12 gram CO2 cartridges in any marker with a standard ASA tank thread.