If you want to connect two hoses with each other you may require the Air Line Connector. This adaptor has two female hand-tight connections on the both sides.
- Special Offers New
- Paintballs addremove
- Markers addremove
- Goggles addremove
- Air Systems addremove
- Gear addremove
- Loaders addremove
- Accessories addremove
- Field addremove
Totem Air Urethane Bottle O’ring 1 unit
Reference: 04040016
These are excellent replacement orings for your C02 or Compressed Air tank. Always keep a bunch of these around or you'll be begging everyone in the staging area for a spare.
![Totem Air Urethane Bottle O’ring 1 unit Totem Air Urethane Bottle O’ring 1 unit](https://www.estrategopaintball.com/1049-large_default/totem-air-urethane-bottle-o-ring-1-unit.jpg)
These are excellent replacement orings for your C02 or Compressed Air tank. Always keep a bunch of these around or you'll be begging everyone in the staging area for a spare.
in the same category
Armotech Supralight 0.8L/48ci 4500 psi UL...
0.8 Liter (4500 PSI / 300 bar)
PI certification
Weight 550g
Diameter 100 mm
Length 180 mm
For use with Macroline 6.3 mm hose fittings only. Awesome alternative to steel braided hoses that never seem to be long or short enough.
30 cm
Manta Dual Fill Panel with Pressure Reducer 2...
The Dual Outlet Fill Panel is a perfect solution for those who don't want to waste their time for filling.
Totem Air Coltri Compressor Icon EM 100...
Charging rate
Measured during 10 liters cylinder filling from 0-200 bar tolerance +/- 5% at + 20° C ambient temperature.
100 EM 100 l/min
6 m3/h
3.5 CFM
Purification system Eco-filter
Totem Air Regulator Part S19 Pin
Parts to repair Totem Air Preset Regulators.
The pressure checker is used for measuring the condition of compressed air. This instrument has a 5/8" male connection and an easy-to-read pressure gauge.
Totem Air "Tattoo" 1.1L/68ci 4500 psi UL...
Totem Air "Tattoo" UL 1.1L/68ci 4500psi Tank
PI0029 standard
Composite Tank with aluminum inner shell and polyurethane shock and abrasion-resistant coating.
Hydrotest every 5 years Characteristics:
Length: 20.5 cm
Maximum pressure: 4500 PSI / 310 bar
Empty weight: 790 g
The Steel Braided Hose allows users to connect a fill panel with a compressor or another fill panel. Our hoses have got male connections at each end.
A tool that is used during the service of a Manta Quick Filler. The tool is specially designed for easy access to the quick fillers internals if you want to replace any part inside.
Custom Products Lightning Drop
Totem Air Regulator Part S17 Piston Head Oring
Parts to repair Totem Air Preset Regulators.
Totem Air Premium Preset 3000psi - 800 psi...
Preset with excellent quality for 3000 PSI bottles.
Totem Air Regulator Part S18 Pin Spring
Parts to repair Totem Air Preset Regulators.