Any Scuba/Dive shop will allow you to purchase a compressed air tank (typically, they stand about mid-thigh high and hold up to 4500psi). Once you´ve purchased the scuba tank and filled it, all you need to do is mount this fill station adapter to the top of it.
It´s self-explanatory to mount, it can only go on one way. Attach your compressed air paintball tank to the fill nipple, close the release valve on the fill station, open the flow of gas using the large knob on the scuba tank, and air will flow into your paintball gun´s compressed air tank. Once the flow of gas has stopped (meaning pressure has equalized between the two tanks), turn off the flow of gas using the large knob on the scuba tank.
Twist the release valve on the fill station, unhook your compressed air tank, and go play paintball! Simple enough.
Dirt, paint and other debris getting in your fill nipple works its way through your HPA tank, destroying seals and o rings in both your tank and marker.
Totem Air "Tattoo" 1.5L/88ci 4500 psi UL Composite Tank
1.5L Tank (88Ci) Pressure 4500 PSI UL (Ultra Light). PI0029 standard Composite Tank with aluminum inner shell and polyurethane shock and abrasion-resistant coating. Hydrotest every 5 years
Characteristics:
Diameter: 10.5 cm Length: 25 cm Maximum pressure: 4500 PSI / 310 bar Empty weight: 940 g
Comes with an on / off valve, to make shutting off the CO2 flow to the gun easy - Just turn the valve off and unscrew the tank, saving you lots of air! Approximately 1100 shots per fill, never have to worry about running out of air mid-game
Umarex CO₂ capsules are distinguished by constant high pressure and uniform quality. The constant pressure ensures that each shot is the same as the previous one. The thread is free of burrs that could damage the seals in the gun.
PTFE sealing tape eliminates the need for lubricants and vacuum greases on ground-glass joints, desiccators, and bell jars. It provides a vacuum-tight seal, yet will release readily even after long periods of time.