An on/off valve for a paintball gun comprises a valve body.
- Special Offers New
- Paintballs addremove
- Markers addremove
- Goggles addremove
- Air Systems addremove
- Gear addremove
- Loaders addremove
- Accessories addremove
- Field addremove
Totem Air Regulator Part S16 Brass Piston
Reference: 04040032
Parts to repair Totem Air Preset Regulators.
![](https://www.estrategopaintball.com/5446-large_default/totem-air-regulator-part-s16-brass-piston.jpg)
Parts to repair Totem Air Preset Regulators.
in the same category
Totem Air "Tattoo" 0.8L/48ci 4500 psi UL...
Totem Air "Tattoo" 0.8L/48ci 4500 psi UL Composite Tank
PI0029 standard
Composite Tank with aluminum inner shell and polyurethane shock and abrasion-resistant coating.
Hydrotest every 5 years
Length: 16.5 cm
Maximum pressure: 4500 PSI / 310 bar
Empty weight: 670 g
Totem Air 20 Oz Pi Bottle + Pin Valve
Your gun isn´t going to shoot itself, is it?
Totem Air Regulator Part S18 Pin Spring
Parts to repair Totem Air Preset Regulators.
90 Grams CO2 Cartridge to Paintball Tank Thread...
Adapter for 90 gram CO2 tanks
Connects 90 gram CO2 tank to any standard paintball marker ASA
Works directly with the Valken C02 Cartridge 90 gram (Item #96680)
Also works with most 88 gram cartridges
Totem Air High Pressure Regulator 4500psi - 800...
Screws in any Standard 4500psi Tank, Plated aluminum piston that produces an industry leading recharge rate and virtually eliminates reg shoot down, Non wrist digging, low profile design fill valve, All black tactical look, Meets all DOT, CGA and ASTM specifications, 4500psi
With the Manta Air Hole Plug you can close either a connection of your storage tank or the end of a compressed air hose. It’s the way to go to blind your Manta Paintball filling system.
Totem Air Regulator Part S15 Piston Small Oring
Parts to repair Totem Air Preset Regulators.
Totem Air Regulator Part S07 Fill Nipple Oring
Parts to repair Totem Air Preset Regulators.
Totem Air Coltri Compressor MCH6, Gasoline...
Charging rate: 100 L/min - 6 m³/h - 3,5 CFM
Filling time cylinder 10 L - 0-200 Bar: 20 min
Dry weight: 37 Kg / 81.5 lbs
Dimensions:
height 35cm/13.7", width 78cm/30.7", depth 32cm/12.5"
Totem Air Coltri Compressor Icon ET 100...
Charging rate
Measured during 10 liters cylinder filling from 0-200 bar tolerance +/- 5% at + 20° C ambient temperature.
100 ET 100 l/min
6 m3/h
3.5 CFM
Purification system Eco-filter
If you want to connect two hoses with each other you may require the Air Line Connector. This adaptor has two female hand-tight connections on the both sides.