Totem Air Rubber Fill Nipple Protector
Dirt, paint and other debris getting in your fill nipple works its way through your HPA tank, destroying seals and o rings in both your tank and marker.
Reference: 04040030
Parts to repair Totem Air Preset Regulators.
Parts to repair Totem Air Preset Regulators.
Dirt, paint and other debris getting in your fill nipple works its way through your HPA tank, destroying seals and o rings in both your tank and marker.
The Totem Air 0.21 air paintball tank offers a slightly smaller tank.
Easy operation.
Pushbutton vent.
Can Be used with Scuba Tanks with DIN connector
Rated for 300bar/4500psi
Parts to repair Totem Air Preset Regulators.
1.1 Liter (4500 PSI / 300 bar)
PI certification
Weight 650g
Diameter 100 mm
Height 220 mm
Easy operation.
Pushbutton vent.
Can Be used with Scuba Tanks with A Clamp / Yoke connector
Rated for 300bar/4500psi
The Quick Filler is the fastest way to fill a paintball tank with high pressure air.
Parts to repair Totem Air Preset Regulators.
For operation under difficult conditions, such as continuous running and/or high ambient temperatures.
The Quick Disconnect O-Ring is a replacement o-ring for the female side of a quick disconnect
Comes with an on / off valve, to make shutting off the CO2 flow to the gun easy - Just turn the valve off and unscrew the tank, saving you lots of air!
Approximately 1100 shots per fill, never have to worry about running out of air mid-game
Totem Air "Tattoo" 1.5L/88ci 4500 psi UL Composite Tank
Umarex CO₂ capsules are distinguished by constant high pressure and uniform quality. The constant pressure ensures that each shot is the same as the previous one. The thread is free of burrs that could damage the seals in the gun.
Content 1 ml
Weight 449 g
With the Manta Air Hole Plug you can close either a connection of your storage tank or the end of a compressed air hose. It’s the way to go to blind your Manta Paintball filling system.