Totem Air Regulator Part S07 Fill Nipple Oring
Parts to repair Totem Air Preset Regulators.
Parts to repair Totem Air Preset Regulators.
Complete Oring Kit for Fill Stations
Easy operation.
Pushbutton vent.
Can Be used with Scuba Tanks with DIN connector
Rated for 300bar/4500psi
Charging rate
Measured during 10 liters cylinder filling from 0-200 bar tolerance +/- 5% at + 20° C ambient temperature.
100 ET 100 l/min
6 m3/h
3.5 CFM
Purification system Eco-filter
The Manta Dual Fill Panel is designed for charging high-pressure cylinders (200/300 BAR), has reliable lever valves with automatic vent, made of very high quality materials. It is possible to charge two cylinders simultaneously. At the end of the hose there is a quick-connect coupling with a fuse and a convenient handle. On both sides fit two typical HP 5/8′ inputs, allowing several panels to be connected in series. The Fill Panel has large, easy-to-read pressure gauges and a solid steel housing with an anti-corrosion coating. The recommended way to mount the device: fastening to the table or hanging on the wall.
Totem Air Micro SPL Regulator Regulator for pressures between 40 and 200 psi. Adjustable with only one tool, simple and uncomplicated. Lightweight and portable
Adjustable output pressure from 40psi to 200psi
Integral tournament lock can be secured with a standard zip-tie.
Compatible with standard HPA as well as SLP tanks.
Includes 36'' cable and HPE adaptor/connector US - Foster 23-2 1/8" Male NPT
Centerflag inline regulator made with good quality materials with output control from 0-450 psi, using an allen adjustment wrench from below.
You can install a pressure gauge, so you can always check the inlet pressure for the marker.
Preset with excellent quality for 3000 PSI bottles.
Parts to repair Totem Air Preset Regulators.
Required on many stockclass, pistol paintball markers and airsoft replicas.
The Pro Mini Rail fits perfectly on our Pro Mini On /Off ASA or any standard Dovetail ASA.