Totem Air Rubber Fill Nipple Protector
Dirt, paint and other debris getting in your fill nipple works its way through your HPA tank, destroying seals and o rings in both your tank and marker.
Dirt, paint and other debris getting in your fill nipple works its way through your HPA tank, destroying seals and o rings in both your tank and marker.
1.5 Liter Tank (4500 PSI / 300 bar)
PI certification
Weight 850g
Diameter 110 mm
Height 290 mm
Regulator with HP 800 psi or LP 450 psi Output
Adapter for connecting Bauer cables to Manta filling panels.
Totem Air Micro SPL Regulator Regulator for pressures between 40 and 200 psi. Adjustable with only one tool, simple and uncomplicated. Lightweight and portable
Adjustable output pressure from 40psi to 200psi
Integral tournament lock can be secured with a standard zip-tie.
Compatible with standard HPA as well as SLP tanks.
Includes 36'' cable and HPE adaptor/connector US - Foster 23-2 1/8" Male NPT
Keep your bottle in good condition, simply put on this washable neoprene cover, for 0.2 liter cylinders.
Internal replacement/repair part for filling panels/Quick filler Manta, to stop air leaks.
Also have the "Manta Air Valve Insert Key", so you can disassemble and remove the part.
Preset with excellent quality for 3000 PSI bottles.
Easy operation.
Pushbutton vent.
Can Be used with Scuba Tanks with A Clamp / Yoke connector
Rated for 300bar/4500psi
Adapter for 90 gram CO2 tanks
Connects 90 gram CO2 tank to any standard paintball marker ASA
Works directly with the Valken C02 Cartridge 90 gram (Item #96680)
Also works with most 88 gram cartridges
Keep your bottles clean and protected with a tank cover.
A TRIPLEX® filter cartridge has a capacity of 92 000 litres of air at 200 bar or 138 000 litres of air at 300 bar.
Great for paintball scenario, tactical or recreational. Flexivel which allows you to maneuver through even the most difficult terrain. It is very durable and works with all cylinders of compressed air and Co2
Totem Air "Tattoo" UL 1.1L/68ci 4500psi Tank
Centerflag inline regulator made with good quality materials with output control from 0-450 psi, using an allen adjustment wrench from below.
You can install a pressure gauge, so you can always check the inlet pressure for the marker.