The Steel Braided Hose allows users to connect a fill panel with a compressor or another fill panel. Our hoses have got male connections at each end.
- Special Offers New
- Paintballs addremove
- Markers addremove
- Goggles addremove
- Air Systems addremove
- Gear addremove
- Loaders addremove
- Accessories addremove
- Field addremove
Manta Air Lever Spring ZD-3505
Reference: 04140342
![](https://www.estrategopaintball.com/5160-large_default/manta-air-lever-spring-zd-3505.jpg)
in the same category
Totem Air Regulator Part S16 Brass Piston
Parts to repair Totem Air Preset Regulators.
Totem Air Regulator Part S18 Pin Spring
Parts to repair Totem Air Preset Regulators.
This hose serves primarily to convey air from one cylinder to another. As the name suggest, it is equipped with a bleed valve to get rid of unwanted air which accumulates inside the hose.
Totem Air Regulator Part S21 Bonnet Screw
Parts to repair Totem Air Preset Regulators.
For use with Macroline 6.3 mm hose fittings only. Awesome alternative to steel braided hoses that never seem to be long or short enough.
30 cm
Totem Air 20 Oz Pi Bottle No Valve
The gas efficiency of the valve in your paintball gun and the temperature during play.
The Smart Valve resembles previous versions with one critical difference:
it has a built-in safety device.
Totem Air Regulator Part S11 Gauge
This is a high quality micro gauge to display your current pressure from your regulator. Great upgrade or addition to your paintball marker!
Totem Air "Tattoo" 1.1L/68ci 4500 psi UL...
Totem Air "Tattoo" UL 1.1L/68ci 4500psi Tank
PI0029 standard
Composite Tank with aluminum inner shell and polyurethane shock and abrasion-resistant coating.
Hydrotest every 5 years Characteristics:
Length: 20.5 cm
Maximum pressure: 4500 PSI / 310 bar
Empty weight: 790 g
The Air Socket Splitter comes with 4 female couplings, which can be exchanged.
Totem Air Urethane Bottle O’ring 1 unit
These are excellent replacement orings for your C02 or Compressed Air tank. Always keep a bunch of these around or you'll be begging everyone in the staging area for a spare.
Totem Air Comp Air Fill Station Scuba with Hose...
Easy operation.
Pushbutton vent.
Can Be used with Scuba Tanks with A Clamp / Yoke connector
Rated for 300bar/4500psi