If you want to connect two hoses with each other you may require the Air Line Connector. This adaptor has two female hand-tight connections on the both sides.
Subcategories
There are 95 products.
Connect effortlessly to any HP installation point with adaptable configurations. This regulator reduces pressure in you Manta Paintball filling system from 300 bar to 200 bar, ensuring worry-free self-service use at dedicated 200-bar stations, preventing clients from exceeding bottle pressure limits.
The Air Cutoff Valve permits its users to turn the air off to a compressor or fill panel by closing the air lines.
The 6-socket Air Splitter comes with six female couplings, which could be interchanged.
The Air Socket Splitter comes with 4 female couplings, which can be exchanged.
The Air Line Splitter comes with one male and three female couplings, which could be interchanged.
Maximum working pressure 35MPa
Power supply, typical HP 5/8" socket
Weight 660g
Total dimensions 105x35x140 mm
The pressure checker is used for measuring the condition of compressed air. This instrument has a 5/8" male connection and an easy-to-read pressure gauge.
The Transfiller is the simplest fill station with a bleed valve.
This transfiller comes with a flexible hose to make filling much easier.
The Manta Fill Panel is designed for charging high-pressure cylinders (200/300 BAR), has reliable lever valves with automatic vent, made of very high quality materials. At the end of the hose there is a quick-connect coupling with a fuse and a convenient handle. On both sides fit two typical HP 5/8′ inputs, allowing several panels to be connected in series. The Fill Panel has large, easy-to-read pressure gauges and a solid steel housing with an anti-corrosion coating. The recommended way to mount the device: fastening to the table or hanging on the wall.
The Manta Dual Fill Panel is designed for charging high-pressure cylinders (200/300 BAR), has reliable lever valves with automatic vent, made of very high quality materials. It is possible to charge two cylinders simultaneously. At the end of the hose there is a quick-connect coupling with a fuse and a convenient handle. On both sides fit two typical HP 5/8′ inputs, allowing several panels to be connected in series. The Fill Panel has large, easy-to-read pressure gauges and a solid steel housing with an anti-corrosion coating. The recommended way to mount the device: fastening to the table or hanging on the wall.
Includes a full-range of replacement parts for the Tippmann 98 Custom™ and Custom Pro™ markers.